2026 Mercedes-Benz Atego

2026 MERCEDES-BENZ ATEGO 1427 4x2 CAB CHASSIS

270HP | 8-SPEED POWERSHIFT | REAR AIR SUSPENSION | FACTORY DIFF LOCK

The 2026 Mercedes-Benz Atego 1427 is a versatile and capable medium-duty cab chassis designed for metropolitan and regional distribution, equipment transport and tilt-slide applications.

With a 14,800kg GVM, 34,000kg GCM, 5,360mm wheelbase and factory-fitted PTO, this Atego provides an excellent platform for a complete body package built around your operational requirements.

Suitable body applications include:

• 12-pallet tray
• 12-pallet curtainsider or tautliner
• Tilt-slide or vehicle-recovery body
• Pantech
• Refrigerated body
• General freight body
• Specialised transport equipment

Speak with Turnbulls Gippsland about purchasing the cab chassis or arranging a complete truck-and-body package.

ENGINE AND PERFORMANCE

• Mercedes-Benz OM936 7.7-litre six-cylinder turbo-diesel engine
• 272HP/200kW
• 1,100Nm of torque
• Strong performance for metropolitan and regional operation
• High-performance engine brake
• 100km/h speed limiter
• 325-litre aluminium fuel tank
• 35-litre AdBlue tank

EIGHT-SPEED POWERSHIFT TRANSMISSION

• Mercedes-Benz G140-8 eight-speed PowerShift transmission
• Automated gear selection
• Single-plate clutch
• Smooth two-pedal operation
• Reduced driver workload in metropolitan traffic
• Rear axle ratio: 3.583
• Approximately 1,719rpm at 100km/h

The Mercedes-Benz PowerShift transmission delivers smooth automated gear changes while balancing performance, fuel efficiency and driver comfort.

FACTORY PTO

• Factory-fitted Mercedes-Benz MB 121-2c PTO
• Pump fitted
• Suitable for hydraulic body applications
• Excellent foundation for tilt-slide and specialised equipment installations

Final PTO suitability and hydraulic requirements should be confirmed with the selected body builder.

FACTORY DIFFERENTIAL LOCK AND REAR AIR SUSPENSION

• 11,000kg hypoid rear axle
• Factory-fitted rear differential lock
• Two-bag rear air suspension
• Improved traction in slippery or uneven conditions
• Air suspension assists with ride quality and load management
• 5,300kg front axle
• Parabolic front suspension

The factory rear differential lock provides additional traction when operating on wet loading areas, gravel surfaces, worksites or other low-grip environments.

WEIGHTS AND CHASSIS

• GVM: 14,800kg
• GCM: 34,000kg
• 4x2 configuration
• Wheelbase: 5,360mm
• Rear overhang: 3,085mm
• Heavy-duty body-ready chassis

ADVANCED SAFETY TECHNOLOGY

• Active Brake Assist 6
• Frontguard Assist
• Active Sideguard Assist 2
• Pedestrian detection
• Vulnerable road-user detection around the front and side of the truck
• Lane Keeping Assist
• Attention Assist
• Stability Control Assist
• Anti-lock Braking System
• Traction Control System
• Electronic Braking System
• Driver SRS airbag
• Reverse camera
• Automatic light sensor
• Automatic rain sensor
• LED daytime running lamps
• Halogen fog lamps

ACTIVE BRAKE ASSIST 6

Active Brake Assist 6 supports the driver by monitoring the road ahead and responding when a potential collision risk is detected.

Combined with Frontguard Assist and Active Sideguard Assist 2, the Atego provides additional detection around critical areas at the front and side of the truck, including support for identifying pedestrians and other vulnerable road users.

These systems are particularly valuable during metropolitan deliveries, depot movements and operation in areas with pedestrians, cyclists and frequent traffic interaction.

BRAKING AND TRAILER EQUIPMENT

• Disc brakes
• Electronic Braking System
• Anti-lock Braking System
• Traction Control System
• Stability Control Assist
• High-performance engine brake
• Trailer braking system

S-CAB CLASSICSPACE

• Extended 2.3-metre S-Cab ClassicSpace with engine tunnel
• Driver’s suspension seat
• Centre seat with three-point seatbelt
• Air conditioning
• Classic cockpit
• Cab rear-wall window
• Transparent exterior sun visor
• Tinted windscreen
• Heated external mirrors
• Four remote-control keys
• Practical cabin storage
• Excellent forward visibility

ELECTRICAL AND CONNECTIVITY

• Fleetboard with 48 months of complimentary access
• 100-amp alternator
• Twin 165Ah batteries
• Chassis-mounted battery carrier
• Pre-installation for CB radio
• 12-volt connection and DIN slot
• Pre-installation for rotating beacons

WHEELS AND TYRES

• 7.50 x 19.5-inch steel wheels
• 285/70R19.5 tyres

BODY-BUILD OPTIONS

Turnbulls Gippsland can coordinate a complete vehicle solution suitable for your business.

Available body configurations can include:

• 12-pallet steel or alloy tray
• 12-pallet curtainsider with optional tailgate loader
• Tilt-slide body for machinery or vehicle transport
• Pantech or refrigerated body
• Toolboxes, load restraint and storage equipment
• Tow equipment, lighting and camera systems
• Other specialised body requirements

Body specifications, payload, dimensions and equipment can be tailored in consultation with suitable body builders.

WARRANTY AND SUPPORT

• Two-year bumper-to-bumper factory warranty
• Five-year/250,000km driveline warranty
• Warranty coverage is subject to Mercedes-Benz terms, conditions and applicable kilometre limits
• Backed by the authorised Mercedes-Benz Trucks dealer network
• Genuine servicing, finance, insurance, parts and accessories available

With 272HP, 1,100Nm of torque, an eight-speed PowerShift transmission, factory PTO, rear air suspension, differential lock and the latest Mercedes-Benz active-safety technology, the Atego 1427 is a highly capable platform for freight, distribution and tilt-slide work.

Contact Turnbulls Gippsland today for cab-chassis pricing or to discuss a complete 12-pallet tray, curtainsider or tilt-slide package built for your application.

For more than 60 years, Turnbulls Gippsland has delivered personalised service and competitive commercial vehicle solutions. From our dealership, we provide Mercedes-Benz, Freightliner, Fuso and Hino truck s, genuine servicing, finance, insurance, parts and accessories.