Disclaimers
2. EGC prices exclude government charges and on-road costs. Contact the dealer to determine charges applicable to you.
2. EGC prices exclude government charges and on-road costs. Contact the dealer to determine charges applicable to you.

2026 HINO 300 SERIES 616 STANDARD CAB TIPPER PRO EURO 6
CAR LICENCE | FACTORY BUILT-TO-GO TIPPER | SIX-SPEED AUTOMATIC
The 2026 Hino 300 Series 616 Standard Cab Tipper Pro is a compact, ready-to-work factory tipper combining car-licence operation, a 1.9m³ steel body and six-speed true automatic transmission.
With its 4,499kg standard GVM, approximately 1,664kg of indicative carrying capacity and tight 9.6-metre turning circle, the 616 Tipper Pro is ideally suited to landscaping, gardening, property maintenance, construction and general trade work.
Model: 616 AT 2525 Standard Cab Tipper Pro
Product Code: XZU605R-WKTMVQ3 TP
GVM: 4,499kg
GCM: 7,999kg
Licence: Car licence
Transmission: Six-speed automatic
Tipper Capacity: 1.9m³
FACTORY TIPPER BODY
• Hino factory Built-to-Go Tipper Pro body
• Heavy-duty all-steel construction
• 1.9m³ body capacity
• Internal body length: 3,000mm
• Internal body width: 1,750mm
• Drop-side and tailgate height: 370mm
• 3.2mm steel deck plate
• 3.2mm front plate
• 2.3mm drop sides
• 3.2mm tailgate
• Integrated body lock
• Rope rails
• Underbody hydraulic hoist
The compact three-metre body provides useful capacity for soil, mulch, gravel, green waste, tools, equipment and general trade materials.
DROP SIDES AND BARN-DOOR TAILGATE
• Drop sides for flexible loading and unloading
• Twin barn-door rear gates
• Rear gates swing clear to provide unobstructed deck access
• Automatic bottom tailgate release during tipping
• Tailgate operation integrated with the tipper control
• Clear rear access for forklift or machinery loading
The combination of drop sides and swing-clear barn doors allows the body to operate as both a conventional tipper and a practical dropside tray.
HYDRAULIC TIPPING SYSTEM
• 60-degree maximum tipping angle
• VC02-04 hydraulic pump
• 100mm x 350mm hydraulic cylinder
• Tipper control lever located inside the cab
• Automatic tailgate release
• Integrated body-locking system
The in-cab control allows the driver to operate the tipper without leaving the cab, while the 60-degree tipping angle assists with the efficient discharge of loose materials.
PAYLOAD AND RATINGS
Standard car-licence rating:
• GVM: 4,499kg
• GCM: 7,999kg
• Indicative completed vehicle mass: approximately 2,835kg
• Indicative carrying capacity: approximately 1,664kg
Optional Light Rigid rating:
• Optional GVM: 5,500kg
• Optional GCM: 9,000kg
• Indicative carrying capacity at 5,500kg GVM: approximately 2,665kg
• Light Rigid licence required
The final legal payload will depend on the vehicle’s actual tare weight, fuel load, occupants, accessories, load distribution and axle limits. A weighbridge certificate should be used to confirm the available payload.
ENGINE AND PERFORMANCE
• Hino four-litre four-cylinder turbo-diesel engine
• 150HP/110kW
• 440Nm of torque
• Turbocharged and intercooled
• Electronic common-rail fuel injection
• Exhaust brake
• 70-litre diesel tank
• Engine immobiliser
The 150HP engine and 440Nm torque output provide strong performance for a compact car-licence tipper, whether operating around town or travelling between worksites.
EURO 6 EMISSIONS COMPLIANCE
• ADR 80/04 Euro 6 emissions compliance
• Diesel particulate after-treatment
• Diesel Oxidation Catalyst
• Selective Catalytic Reduction
• Exhaust Gas Recirculation
• AdBlue emissions treatment
SIX-SPEED AUTOMATIC TRANSMISSION
• Six-speed true automatic transmission
• Double-overdrive gearing
• Smooth torque-converter operation
• Simple two-pedal driving
• Reduced driver workload in stop-start conditions
• Well suited to worksites and metropolitan operation
The true automatic transmission makes the 616 Tipper Pro straightforward to operate for businesses with multiple drivers and employees transitioning from passenger vehicles.
ACTIVE SAFETY TECHNOLOGY
• Pre-Collision System
• Autonomous Emergency Braking
• Pedestrian Detection
• Vehicle Stability Control
• Lane Departure Warning System
• Anti-lock Braking System
• Traction Control
• Reverse camera
• Reverse warning buzzer
• LED Daytime Running Lamps
The Pre-Collision System monitors the road ahead and incorporates Autonomous Emergency Braking and Pedestrian Detection to assist the driver when a potential collision risk is identified.
PASSIVE SAFETY
• Driver and front-passenger SRS airbags
• Driver and passenger seatbelt pretensioners
• ECE-R29 cab-strength certification
• Shock-absorbing and collapsible steering column
• Anti-intrusion door beams
DIMENSIONS AND MANOEUVRABILITY
• Wheelbase: 2,525mm
• Overall length: 4,760mm
• Overall width: 1,880mm
• Cab width: 1,695mm
• Overall height: approximately 2,100mm
• Road clearance: approximately 170mm
• Kerb-to-kerb turning circle: approximately 9.6 metres
• Wall-to-wall turning circle: approximately 10.8 metres
Its narrow Standard Cab, short wheelbase and tight turning circle make the 616 Tipper Pro easy to manoeuvre through residential streets, worksites, driveways and confined loading areas.
DRIVER COMFORT AND CONVENIENCE
• Seating for three
• Six-speed automatic transmission
• Air conditioning
• Cruise control
• Power steering
• Reverse camera
• Remote central locking
• Power windows
• Practical dashboard and cabin storage
• Easy-to-read instrumentation
• Excellent forward visibility
WHEELS AND TYRES
• 16-inch six-stud steel wheels
• 185/85R16 tyres
• Dual rear wheels
• Spare wheel and carrier included
AVAILABLE ACCESSORIES
• Retractable body tarp
• Bullbar or nudge bar
• UHF CB radio
• Additional cameras
• Dash camera
• Truck-specific satellite navigation
• Chrome wheel covers
• Stone guard
• Sunvisor
• Weathershields
• Floor mats and seat covers
Accessories are available at additional cost and are subject to availability and installation requirements.
WARRANTY AND SUPPORT
• New Vehicle Warranty: 5 years or 250,000km, whichever occurs first
• Cab Corrosion Perforation Warranty: 60 months
• Hino Roadside Assist
• Hino Service Agreements available
• Hino Genuine Parts and Accessories Warranty: 3 years and unlimited kilometres when fitted by an authorised Hino dealer
• Backed by the authorised Hino dealer network
With its car-licence rating, 1.9m³ factory tipper body, approximately 1.66-tonne indicative carrying capacity, six-speed automatic transmission and comprehensive safety technology, the 2026 Hino 616 Tipper Pro is a compact truck ready to get to work.
Contact Turnbulls Gippsland today for pricing, finance options or to arrange an inspection and test drive.
For more than 60 years, Turnbulls Gippsland has delivered personalised service and competitive commercial vehicle solutions. From our dealership, we provide new and quality used trucks, genuine servicing, finance, insurance, parts and accessories.
Find this Hino 300 Series at Turnbulls Gippsland Truck Centre